BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Black Hammertone
BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Black Hammertone

BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Black Hammertone

BMRSB003H

Regular price$283.01
/
Shipping calculated at checkout.

  • Fast Shipping Available
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB003 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB003 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB003 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.BMR Suspension designed the SB003 sway bar for street performance, drag race, autocross, and road race applications. The SB003 gives you a 149% increase in rate over the stock bar (depending on year and model). These rate increases allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!All kits come with polyurethane mounting bushings and endlink kits.

This Part Fits:

Year Make Model Submodel
1988,1993-2002 Chevrolet Camaro Base
1982-1986 Chevrolet Camaro Berlinetta
1993 Chevrolet Camaro Indianapolis 500 Pace Car
1985-1990 Chevrolet Camaro Iroc-Z
1987 Chevrolet Camaro LT
1989-1992,1996-1997 Chevrolet Camaro RS
1992 Chevrolet Camaro RS Heritage Edition
1982-1987 Chevrolet Camaro Sport
1982-1987,1991-2002 Chevrolet Camaro Z28
1992 Chevrolet Camaro Z28 Heritage Edition
1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car
1998-2002 Chevrolet Camaro Z28 SS
1982-2002 Pontiac Firebird Base
1989-2002 Pontiac Firebird Formula
1982-1986 Pontiac Firebird S/E
1982-2002 Pontiac Firebird Trans Am
1994 Pontiac Firebird Trans Am GT
1989-1992 Pontiac Firebird Trans Am GTA
1989 Pontiac Firebird Trans Am GTA SE

We use UPS, FedEx, DHL, and USPS for deliveries. We are not responsible for any shipping problems and shall not be held liable for any "reasonable" delay beyond our advertised delivery time-frames. Shipment by Ground Courier can take up to 15 business days for delivery. Express Courier can take up to 3 business days for delivery. Shipping time frames are once the order has been processed. Due to high demand, order processing can take 5 to 7 business days.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.